Ctoo: rigidBodySolver.C
Ctoo: chappelear1962.C
Ctoo: newRigidBodySolver.C
Ctoo: stokesFirst.C
Ctoo: symplectic.C
Ctoo: Newmark.C
Ctoo: CrankNicolson.C
waveTheories/solitary/chappelear1962/chappelear1962.C: In member function ‘virtual Foam::scalar Foam::waveTheories::chappelear1962::eta(const point&, const scalar&) const’:
waveTheories/solitary/chappelear1962/chappelear1962.C:156:9: warning: value computed is not used [-Wunused-value]
- 101.0/80.0*Foam::pow(dL_, 3.0)*Foam::pow(T, 6.0);
^
Ctoo: stokesFirstStanding.C
Ctoo: stokesSecond.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libRigidBodyDynamicsEXT.so
wmake rigidBodyMeshMotionEXT
Ctoo: stokesSecondModulation.C
ln: ./lnInclude
dep: rigidBodyMeshMotionSolver.C
dep: rigidBodyMeshMotion.C
Ctoo: stokesFifth.C
Ctoo: cnoidalFirst.C
Ctoo: streamFunction.C
Ctoo: rigidBodyMeshMotion.C
Ctoo: rigidBodyMeshMotionSolver.C
Ctoo: irregular.C
Ctoo: bichromaticFirst.C
Ctoo: bichromaticSecond.C
Ctoo: combinedWaves.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libRigidBodyMeshMotionEXT.so
Ctoo: waveAlphaFvPatchScalarField.C
Ctoo: wavePressureFvPatchScalarField.C
wmake sixDoFRigidBodyMotionEXT
ln: ./lnInclude
dep: Newmark.C
dep: symplectic.C
dep: CrankNicolson.C
dep: newSixDoFSolver.C
dep: sixDoFSolver.C
dep: sixDoFRigidBodyMotionSolver.C
dep: bladedTurbine.C
dep: actuatorDiscTurbine.C
dep: sixDoFRigidBodyMotionBodyForceNew.C
dep: sixDoFRigidBodyMotionBodyForce.C
dep: sixDoFRigidBodyMotionPointConstraint.C
dep: sixDoFRigidBodyMotionPlaneConstraint.C
dep: sixDoFRigidBodyMotionOrientationConstraint.C
dep: sixDoFRigidBodyMotionLineConstraint.C
dep: sixDoFRigidBodyMotionAxisConstraint.C
dep: sixDoFRigidBodyMotionConstraintNew.C
dep: sixDoFRigidBodyMotionConstraint.C
dep: moodyR.C
dep: sphericalAngularDamper.C
dep: linearDamper.C
dep: tabulatedAxialAngularSpring.C
dep: sphericalAngularSpring.C
dep: linearSpring.C
dep: linearAxialAngularSpring.C
dep: sixDoFRigidBodyMotionRestraintNew.C
dep: sixDoFRigidBodyMotionRestraint.C
dep: sixDoFRigidBodyMotionStateIO.C
dep: sixDoFRigidBodyMotionState.C
dep: sixDoFRigidBodyMotionIO.C
dep: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotionState.C
Ctoo: sixDoFRigidBodyMotionIO.C
Ctoo: sixDoFRigidBodyMotionStateIO.C
Ctoo: waveVelocityFvPatchVectorField.C
Ctoo: relaxationShape.C
Ctoo: sixDoFRigidBodyMotionRestraint.C
Ctoo: sixDoFRigidBodyMotionRestraintNew.C
Ctoo: linearAxialAngularSpring.C
Ctoo: linearSpring.C
Ctoo: newRelaxationShape.C
Ctoo: relaxationShapeFrozen.C
Ctoo: sphericalAngularSpring.C
Ctoo: relaxationShapeRectangular.C
Ctoo: tabulatedAxialAngularSpring.C
Ctoo: linearDamper.C
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeFrozen::pointSet()’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:178:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeFrozen::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:188:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libqalefoam.so' is up to date.
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file fields/fvPatchFields/derived/DirichletCoupledValue/DirichletCoupledValueFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/basic/DirichletCoupled/DirichletCoupledFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/derived/mappedDirichletCoupled/mappedDirichletCoupledFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/derived/zmappedDirichletCoupledValue/zmappedDirichletCoupledValueFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/derived/zZeroGradient/zZeroGradientFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/derived/linearWave/linearWaveFvPatchFields.C
Making dependency list for source file fields/fvPatchFields/derived/numericalBeachFvPatchField/numericalBeachFvPatchField.C
Making dependency list for source file fields/fvPatchFields/derived/linearWaveVelocity/linearWaveVelocityFvPatchField.C
Ctoo: sphericalAngularDamper.C
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeRectangular::pointSet()’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:183:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeRectangular::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:193:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: relaxationShapeCylindrical.C
Ctoo: moodyR.C
Ctoo: relaxationShapeSemiCylindrical.C
Ctoo: relaxationShapeLine.C
Ctoo: sixDoFRigidBodyMotionConstraint.C
Ctoo: relaxationWeight.C
Ctoo: sixDoFRigidBodyMotionConstraintNew.C
Ctoo: sixDoFRigidBodyMotionAxisConstraint.C
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeCylindrical::pointSet()’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:139:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:149:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeSemiCylindrical::pointSet()’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:182:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeSemiCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:192:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: relaxationWeightCourantCorrection.C
Ctoo: sixDoFRigidBodyMotionLineConstraint.C
Ctoo: sixDoFRigidBodyMotionOrientationConstraint.C
Ctoo: sixDoFRigidBodyMotionPlaneConstraint.C
Ctoo: relaxationWeightExponential.C
Ctoo: relaxationWeightFreePolynomial.C
Ctoo: sixDoFRigidBodyMotionPointConstraint.C
Ctoo: sixDoFRigidBodyMotionBodyForce.C
Ctoo: sixDoFRigidBodyMotionBodyForceNew.C
Ctoo: relaxationWeightThirdOrderPolynomial.C
Ctoo: actuatorDiscTurbine.C
Ctoo: bladedTurbine.C
Ctoo: relaxationScheme.C
Ctoo: sixDoFRigidBodyMotionSolver.C
Ctoo: newRelaxationScheme.C
Ctoo: relaxationSchemeEmpty.C
Ctoo: sixDoFSolver.C
Ctoo: relaxationSchemeSpatial.C
Ctoo: newSixDoFSolver.C
Ctoo: symplectic.C
Ctoo: CrankNicolson.C
Ctoo: relaxationSchemeSpatialInterpolation.C
Ctoo: numericalBeach.C
Ctoo: newNumericalBeach.C
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 4.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 4.1
Exec : checkMesh -latestTime
Date : Sep 21 2020
Time : 15:29:58
Host : "host-172-16-103-58.nubes.stfc.ac.uk"
PID : 11175
Case : /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/deformDyMMesh_tutorial_ccp
nProcs : 1
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create polyMesh for time = 40
Time = 40
Mesh stats
points: 179435
faces: 499099
internal faces: 482561
cells: 160306
faces per cell: 6.12366
boundary patches: 3
point zones: 0
face zones: 0
cell zones: 0
Overall number of cells of each type:
hexahedra: 149746
prisms: 1734
wedges: 0
pyramids: 0
tet wedges: 0
tetrahedra: 0
polyhedra: 8826
Breakdown of polyhedra by number of faces:
faces number of cells
4 710
5 524
6 1530
9 4760
12 851
15 432
18 19
Checking topology...
Boundary definition OK.
Cell to face addressing OK.
Point usage OK.
Upper triangular ordering OK.
Face vertices OK.
Number of regions: 1 (OK).
Checking patch topology for multiply connected surfaces...
Patch Faces Points Surface topology
stationaryWalls 8271 8547 ok (non-closed singly connected)
atmosphere 81 100 ok (non-closed singly connected)
buoy 8186 9006 ok (closed singly connected)
Checking geometry...
Overall domain bounding box (1.25 -0.75 -1) (2.75 0.75 1)
Mesh has 3 geometric (non-empty/wedge) directions (1 1 1)
Mesh has 3 solution (non-empty) directions (1 1 1)
Boundary openness (-7.20562e-18 9.54711e-17 -1.17352e-16) OK.
Max cell openness = 3.2556e-16 OK.
Max aspect ratio = 3.79873 OK.
Minimum face area = 3.87279e-05. Maximum face area = 0.0339185. Face area magnitudes OK.
Min volume = 2.27709e-07. Max volume = 0.00570383. Total volume = 4.41844. Cell volumes OK.
Mesh non-orthogonality Max: 61.0354 average: 17.3203
Non-orthogonality check OK.
Face pyramids OK.
Max skewness = 1.73772 OK.
Coupled point location match (average 0) OK.
Mesh OK.
End
last folder is = 40
writeControl adjustableRunTime;
writeInterval 0.001;
endTime 41;
Ctoo: Newmark.C
Ctoo: numericalBeachEmpty.C
Ctoo: relaxationZone.C
Ctoo: setWaveField.C
Ctoo: crossVersionCompatibility.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libsixDoFRigidBodyMotionEXT.so
wmake waves2Foam
ln: ./lnInclude
dep: crossVersionCompatibility.C
dep: relaxationZone.C
dep: setWaveField.C
dep: numericalBeachEmpty.C
dep: newNumericalBeach.C
dep: numericalBeach.C
dep: relaxationSchemeSpatialInterpolation.C
In file included from relaxationZone/relaxationZone.C:27:0:
relaxationZone/relaxationZone.H: In constructor ‘Foam::relaxationZone::relaxationZone(const Foam::fvMesh&, Foam::volVectorField&, Foam::volScalarField&)’:
relaxationZone/relaxationZone.H:79:29: warning: ‘Foam::relaxationZone::targetVelocity_’ will be initialized after [-Wreorder]
mutable volVectorField* targetVelocity_;
^
relaxationZone/relaxationZone.H:63:14: warning: ‘Foam::wordList Foam::relaxationZone::relaxNames_’ [-Wreorder]
wordList relaxNames_;
^
relaxationZone/relaxationZone.C:41:1: warning: when initialized here [-Wreorder]
relaxationZone::relaxationZone
^
dep: relaxationSchemeSpatial.C
dep: relaxationSchemeEmpty.C
dep: newRelaxationScheme.C
dep: relaxationScheme.C
dep: relaxationWeightThirdOrderPolynomial.C
dep: relaxationWeightFreePolynomial.C
dep: relaxationWeightExponential.C
dep: relaxationWeightCourantCorrection.C
dep: relaxationWeight.C
dep: relaxationShapeLine.C
dep: relaxationShapeSemiCylindrical.C
dep: relaxationShapeCylindrical.C
dep: relaxationShapeRectangular.C
dep: relaxationShapeFrozen.C
dep: newRelaxationShape.C
dep: relaxationShape.C
dep: waveVelocityFvPatchVectorField.C
dep: waveAlphaFvPatchScalarField.C
dep: irregularFast.C
dep: oceanWave3D.C
dep: emptyExternal.C
dep: externalWaveForcing.C
dep: externalSource.C
dep: combinedWaves.C
dep: bichromaticSecond.C
dep: bichromaticFirst.C
dep: irregular.C
dep: streamFunction.C
dep: cnoidalFirst.C
dep: stokesFifth.C
dep: stokesSecondModulation.C
dep: stokesSecond.C
dep: stokesFirstStanding.C
dep: stokesFirst.C
dep: chappelear1962.C
dep: solitaryFirst.C
dep: potentialCurrent.C
dep: newWaveTheory.C
dep: waveTheory.C
dep: localCellNeg.C
dep: localCell.C
dep: localFace.C
dep: convexPolyhedral.C
Ctoo: convexPolyhedral.C
Ctoo: localCell.C
Ctoo: localFace.C
Ctoo: localCellNeg.C
In file included from convexPolyhedral/localCell.C:36:0:
convexPolyhedral/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
convexPolyhedral/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
In file included from convexPolyhedral/convexPolyhedral.H:56:0,
from convexPolyhedral/convexPolyhedral.C:36:
convexPolyhedral/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
convexPolyhedral/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
convexPolyhedral/convexPolyhedral.C: In member function ‘void Foam::convexPolyhedral::faceCut(const labelList&, const edgeList&, const labelList&, Foam::localCell&)’:
convexPolyhedral/convexPolyhedral.C:217:50: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
if (Foam::sign( f.normal( lc.points()) & normalToPlane_ ) == 1)
^
convexPolyhedral/convexPolyhedral.C: In member function ‘void Foam::convexPolyhedral::faceCut(const labelList&, const edgeList&, const labelList&, Foam::localCellNeg&)’:
convexPolyhedral/convexPolyhedral.C:323:50: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
if (Foam::sign( f.normal( lc.points()) & normalToPlane_ ) == 1)
^
convexPolyhedral/convexPolyhedral.C: In member function ‘void Foam::convexPolyhedral::unionSet(const Foam::localCell&, Foam::localCell&)’:
convexPolyhedral/convexPolyhedral.C:746:47: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
const vector n( fL[c[facei]].normal(pp) );
^
convexPolyhedral/convexPolyhedral.C: In member function ‘void Foam::convexPolyhedral::unionSet(const Foam::localCellNeg&, Foam::localCellNeg&)’:
convexPolyhedral/convexPolyhedral.C:777:47: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
const vector n( fL[c[facei]].normal(pp) );
^
Ctoo: waveTheory.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libwaves2Foam.so
wmake waves2FoamProcessing
ln: ./lnInclude
wmkdep: zeroCrossing.C
wmkdep: trapz.C
wmkdep: cumTrapz.C
wmkdep: ensembleAverage.C
Ctoo: newWaveTheory.C
wmkdep: reflectionAnalysis2DLS.C
wmkdep: powerSpectraLS.C
wmkdep: reflectionAnalysis2DFFT.C
wmkdep: powerSpectraFFT.C
wmkdep: spectralMethodsLeastSquaresBased.C
wmkdep: spectralMethodsFFTBased.C
wmkdep: complexExp.C
wmkdep: interpolateOvertopping.C
wmkdep: interpolateAlphaProbes.C
wmkdep: interpolateForcesAndMoments.C
wmkdep: interpolateVelocityProbes.C
wmkdep: interpolateSurfaceElevation.C
wmkdep: removeSubDirs.C
wmkdep: removeData.C
wmkdep: writeIndexLocation.C
wmkdep: write2Ascii.C
wmkdep: rawOvertopping.C
wmkdep: rawAlphaProbes.C
wmkdep: rawForcesAndMoments.C
wmkdep: rawVelocityProbes.C
wmkdep: rawSurfaceElevation.C
Ctoo: potentialCurrent.C
Ctoo: solitaryFirst.C
wmkdep: postProcessingWaves.C
wmkdep: quadrilateralDistribution.C
wmkdep: circularDistribution.C
wmkdep: lineDistribution.C
wmkdep: userDefinedDistribution.C
wmkdep: pointDistributions.C
wmkdep: probeGauges.C
wmkdep: waveGauges.C
wmkdep: oceanWave3DProperties.C
wmkdep: externalSourceProperties.C
wmkdep: combinedWavesProperties.C
wmkdep: irregularProperties.C
wmkdep: randomPhase.C
wmkdep: focusingPhase.C
wmkdep: phases.C
wmkdep: PiersonMoskowitz.C
waveTheories/waveTheory/waveTheory.C: In constructor ‘Foam::waveTheories::waveTheory::waveTheory(const Foam::word&, const Foam::fvMesh&)’:
waveTheories/waveTheory/waveTheory.C:94:56: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
rhoWater_ = (dimensionedScalar(sD.lookup("rho"))).value();
^
wmkdep: JONSWAP.C
wmkdep: cosineStretchedFrequencyAxis.C
wmkdep: equidistantFrequencyAxis.C
wmkdep: frequencyAxis.C
wmkdep: waveSpectra.C
wmkdep: bichromaticSecondProperties.C
wmkdep: bichromaticFirstProperties.C
wmkdep: streamFunctionProperties.C
wmkdep: cnoidalFirstProperties.C
wmkdep: stokesFifthProperties.C
wmkdep: stokesSecondModulationProperties.C
wmkdep: stokesSecondProperties.C
wmkdep: stokesFirstStandingProperties.C
wmkdep: stokesFirstProperties.C
wmkdep: chappelear1962Properties.C
wmkdep: solitaryFirstProperties.C
wmkdep: potentialCurrentProperties.C
wmkdep: setWaveProperties.C
Ctoo: setWaveProperties.C
Ctoo: solitaryFirstProperties.C
Ctoo: potentialCurrentProperties.C
Ctoo: chappelear1962Properties.C
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libfiniteVolumeWsiFoam.so' is up to date.
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file sixDoFRigidBodyMotion/sixDoFRigidBodyMotionState.C
Making dependency list for source file sixDoFRigidBodyMotion/sixDoFRigidBodyMotion.C
Making dependency list for source file sixDoFRigidBodyMotion/sixDoFRigidBodyMotionIO.C
Making dependency list for source file sixDoFRigidBodyMotion/sixDoFRigidBodyMotionStateIO.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/sixDoFRigidBodyMotionRestraint/sixDoFRigidBodyMotionRestraint.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/sixDoFRigidBodyMotionRestraint/sixDoFRigidBodyMotionRestraintNew.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/linearAxialAngularSpring/linearAxialAngularSpring.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/linearSpring/linearSpring.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/sphericalAngularSpring/sphericalAngularSpring.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/tabulatedAxialAngularSpring/tabulatedAxialAngularSpring.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/linearDamper/linearDamper.C
Making dependency list for source file sixDoFRigidBodyMotion/restraints/sphericalAngularDamper/sphericalAngularDamper.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/sixDoFRigidBodyMotionConstraint/sixDoFRigidBodyMotionConstraint.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/sixDoFRigidBodyMotionConstraint/sixDoFRigidBodyMotionConstraintNew.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/axis/sixDoFRigidBodyMotionAxisConstraint.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/line/sixDoFRigidBodyMotionLineConstraint.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/orientation/sixDoFRigidBodyMotionOrientationConstraint.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/plane/sixDoFRigidBodyMotionPlaneConstraint.C
Making dependency list for source file sixDoFRigidBodyMotion/constraints/point/sixDoFRigidBodyMotionPointConstraint.C
Making dependency list for source file pointPatchFields/derived/sixDoFRigidBodyDisplacement/sixDoFRigidBodyDisplacementPointPatchVectorField.C
Making dependency list for source file sixDoFRigidBodyMotionSolver/sixDoFRigidBodyMotionSolver.C
Making dependency list for source file pointPatchFields/derived/uncoupledSixDoFRigidBodyDisplacement/uncoupledSixDoFRigidBodyDisplacementPointPatchVectorField.C
Making dependency list for source file sixDoFRigidBodyMotionSolver/externalPointEdgePoint.C
Making dependency list for source file sixDoFRigidBodyMotionSolver/pointPatchDist.C
Ctoo: chappelear1962.C
Ctoo: stokesFirst.C
Ctoo: stokesFirstStanding.C
Ctoo: stokesFirstProperties.C
Ctoo: stokesFirstStandingProperties.C
Ctoo: stokesSecondProperties.C
Ctoo: stokesSecond.C
Ctoo: stokesSecondModulationProperties.C
Ctoo: stokesSecondModulation.C
Ctoo: stokesFifthProperties.C
Ctoo: cnoidalFirstProperties.C
Ctoo: streamFunctionProperties.C
Ctoo: bichromaticFirstProperties.C
Ctoo: stokesFifth.C
Ctoo: cnoidalFirst.C
Ctoo: streamFunction.C
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C: In member function ‘Foam::scalar Foam::stokesFifthProperties::waveNumber()’:
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C:82:12: warning: variable ‘valUpper’ set but not used [-Wunused-but-set-variable]
valUpper( eval( upper ) ),
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::lowerMBound_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:57:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::cnoidalFirst_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:74:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
Ctoo: bichromaticSecondProperties.C
Ctoo: waveSpectra.C
Ctoo: frequencyAxis.C
Ctoo: irregular.C
Ctoo: equidistantFrequencyAxis.C
Ctoo: bichromaticFirst.C
Ctoo: bichromaticSecond.C
Ctoo: combinedWaves.C
Ctoo: cosineStretchedFrequencyAxis.C
Ctoo: JONSWAP.C
Ctoo: PiersonMoskowitz.C
Ctoo: phases.C
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libsixDoFRigidBodyMotionWsiFoam.so' is up to date.
+ incompressible/Allwmake
+ wmake libso turbulenceModel
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file turbulenceModelIncompressibleWsiFoam.C
Making dependency list for source file laminar/laminarIncompressibleWsiFoam.C
Ctoo: randomPhase.C
Ctoo: externalSource.C
Ctoo: externalWaveForcing.C
Ctoo: focusingPhase.C
Ctoo: emptyExternal.C
SOURCE=turbulenceModelIncompressibleWsiFoam.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/turbulenceModels -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/transportModels -IlnInclude -I. -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OpenFOAM/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbulenceModelIncompressibleWsiFoam.o
SOURCE=laminar/laminarIncompressibleWsiFoam.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/turbulenceModels -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/transportModels -IlnInclude -I. -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OpenFOAM/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/laminarIncompressibleWsiFoam.o
Ctoo: irregularProperties.C
Ctoo: oceanWave3D.C
Ctoo: combinedWavesProperties.C
Ctoo: externalSourceProperties.C
Ctoo: oceanWave3DProperties.C
Ctoo: waveGauges.C
Ctoo: probeGauges.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from lnInclude/setWaveField.H:60,
from waveTheories/externalWaveForcing/oceanWave3D/oceanWave3D.H:47,
from waveTheories/externalWaveForcing/oceanWave3D/oceanWave3D.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
waveTheories/externalWaveForcing/oceanWave3D/oceanWave3D.C: In member function ‘void Foam::waveTheories::oceanWave3D::mapSolution()’:
waveTheories/externalWaveForcing/oceanWave3D/oceanWave3D.C:455:78: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
dimensionedScalar rho0(dict.subDict(waves2Foam::airPhase()).lookup("rho"));
^
waveTheories/externalWaveForcing/oceanWave3D/oceanWave3D.C:456:80: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
dimensionedScalar rho1(dict.subDict(waves2Foam::waterPhase()).lookup("rho"));
^
Ctoo: irregularFast.C
Ctoo: waveAlphaFvPatchScalarField.C
=====================================
COPYING QALE2DLibrary
=====================================
wmake libraries
wmake sixDoFRigidBodyMotionEXT
ln: ./lnInclude
dep: Newmark.C
dep: symplectic.C
dep: CrankNicolson.C
dep: newSixDoFSolver.C
dep: sixDoFSolver.C
dep: sixDoFRigidBodyMotionSolver.C
dep: bladedTurbine.C
dep: actuatorDiscTurbine.C
dep: sixDoFRigidBodyMotionBodyForceNew.C
dep: sixDoFRigidBodyMotionBodyForce.C
dep: sixDoFRigidBodyMotionPointConstraint.C
dep: sixDoFRigidBodyMotionPlaneConstraint.C
dep: sixDoFRigidBodyMotionOrientationConstraint.C
dep: sixDoFRigidBodyMotionLineConstraint.C
dep: sixDoFRigidBodyMotionAxisConstraint.C
dep: sixDoFRigidBodyMotionConstraintNew.C
dep: sixDoFRigidBodyMotionConstraint.C
dep: ptoForceLookupTable.C
dep: sphericalAngularDamper.C
dep: linearDamper.C
dep: tabulatedAxialAngularSpring.C
dep: sphericalAngularSpring.C
dep: linearSpring.C
dep: linearAxialAngularSpring.C
dep: sixDoFRigidBodyMotionRestraintNew.C
dep: sixDoFRigidBodyMotionRestraint.C
dep: sixDoFRigidBodyMotionStateIO.C
dep: sixDoFRigidBodyMotionState.C
dep: sixDoFRigidBodyMotionIO.C
dep: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotionState.C
Ctoo: sixDoFRigidBodyMotionIO.C
Ctoo: sixDoFRigidBodyMotionStateIO.C
Ctoo: waveVelocityFvPatchVectorField.C
Ctoo: pointDistributions.C
Ctoo: userDefinedDistribution.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from fvPatchFields/waveAlpha/waveAlphaFvPatchScalarField.H:59,
from fvPatchFields/waveAlpha/waveAlphaFvPatchScalarField.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
In file included from lnInclude/convexPolyhedral.H:56:0,
from fvPatchFields/waveVelocity/waveVelocityFvPatchVectorField.H:59,
from fvPatchFields/waveVelocity/waveVelocityFvPatchVectorField.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: sixDoFRigidBodyMotionRestraint.C
waveTheories/externalWaveForcing/irregularFast/irregularFast.C: In member function ‘Foam::scalar Foam::waveTheories::irregularFast::interpolateSurfaceElevation(const point&, const scalar&, const label&, const label&) const’:
waveTheories/externalWaveForcing/irregularFast/irregularFast.C:620:9: warning: unused variable ‘y’ [-Wunused-variable]
scalar y = (p & eY_);
^
Ctoo: sixDoFRigidBodyMotionRestraintNew.C
Ctoo: lineDistribution.C
Ctoo: linearAxialAngularSpring.C
Ctoo: circularDistribution.C
Ctoo: linearSpring.C
Ctoo: quadrilateralDistribution.C
Ctoo: sphericalAngularSpring.C
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libincompressibleTurbulenceModelsWsiFoam.so' is up to date.
+ compressible/Allwmake
+ wmake libso turbulenceModel
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file turbulenceModelCompressibleWsiFoam.C
Making dependency list for source file laminar/laminarCompressibleWsiFoam.C
SOURCE=turbulenceModelCompressibleWsiFoam.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/turbulenceModels -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/thermophysicalModels/basic/lnInclude -IlnInclude -I. -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OpenFOAM/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbulenceModelCompressibleWsiFoam.o
SOURCE=laminar/laminarCompressibleWsiFoam.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/turbulenceModels -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/thermophysicalModels/basic/lnInclude -IlnInclude -I. -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OpenFOAM/lnInclude -I/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/laminarCompressibleWsiFoam.o
Ctoo: relaxationShape.C
sixDoFRigidBodyMotion/restraints/linearSpring/linearSpring.C: In member function ‘virtual void Foam::sixDoFRigidBodyMotionRestraints::linearSpring::restrain(const Foam::sixDoFRigidBodyMotion&, Foam::vector&, Foam::vector&, Foam::vector&) const’:
sixDoFRigidBodyMotion/restraints/linearSpring/linearSpring.C:87:12: warning: unused variable ‘time’ [-Wunused-variable]
scalar time = motion.currentTime();
^
Ctoo: tabulatedAxialAngularSpring.C
Ctoo: postProcessingWaves.C
Ctoo: newRelaxationShape.C
Ctoo: linearDamper.C
Ctoo: sphericalAngularDamper.C
Ctoo: relaxationShapeFrozen.C
Ctoo: rawSurfaceElevation.C
Ctoo: relaxationShapeRectangular.C
Ctoo: rawVelocityProbes.C
Ctoo: ptoForceLookupTable.C
Ctoo: rawForcesAndMoments.C
Ctoo: sixDoFRigidBodyMotionConstraint.C
Ctoo: sixDoFRigidBodyMotionConstraintNew.C
Ctoo: sixDoFRigidBodyMotionAxisConstraint.C
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeFrozen::pointSet()’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:178:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeFrozen::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:188:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
sixDoFRigidBodyMotion/restraints/ptoForceLookupTable/ptoForceLookupTable.C: In member function ‘virtual void Foam::sixDoFRigidBodyMotionRestraints::ptoForceLookupTable::restrain(const Foam::sixDoFRigidBodyMotion&, Foam::vector&, Foam::vector&, Foam::vector&) const’:
sixDoFRigidBodyMotion/restraints/ptoForceLookupTable/ptoForceLookupTable.C:93:12: warning: variable ‘v’ set but not used [-Wunused-but-set-variable]
vector v = motion.velocity(restraintPosition);
^
Ctoo: relaxationShapeCylindrical.C
Ctoo: relaxationShapeSemiCylindrical.C
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeRectangular::pointSet()’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:183:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeRectangular::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:193:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: sixDoFRigidBodyMotionLineConstraint.C
Ctoo: sixDoFRigidBodyMotionOrientationConstraint.C
Ctoo: sixDoFRigidBodyMotionPlaneConstraint.C
Ctoo: relaxationShapeLine.C
Ctoo: sixDoFRigidBodyMotionPointConstraint.C
Ctoo: relaxationWeight.C
Ctoo: rawAlphaProbes.C
Ctoo: rawOvertopping.C
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeCylindrical::pointSet()’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:139:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:149:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: sixDoFRigidBodyMotionBodyForce.C
Ctoo: write2Ascii.C
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libcompressibleTurbulenceModelsWsiFoam.so' is up to date.
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeSemiCylindrical::pointSet()’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:182:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeSemiCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:192:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: writeIndexLocation.C
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file fields/pointPatchFields/derived/DirichletCoupledValue/DirichletCoupledValuePointPatchFields.C
Ctoo: sixDoFRigidBodyMotionBodyForceNew.C
Ctoo: actuatorDiscTurbine.C
Ctoo: bladedTurbine.C
Ctoo: relaxationWeightCourantCorrection.C
Ctoo: relaxationWeightExponential.C
Ctoo: sixDoFRigidBodyMotionSolver.C
Ctoo: sixDoFSolver.C
Ctoo: relaxationWeightFreePolynomial.C
Ctoo: relaxationWeightThirdOrderPolynomial.C
Ctoo: removeData.C
Ctoo: removeSubDirs.C
Ctoo: newSixDoFSolver.C
Ctoo: interpolateSurfaceElevation.C
Ctoo: interpolateVelocityProbes.C
Ctoo: symplectic.C
Ctoo: CrankNicolson.C
Ctoo: relaxationScheme.C
Ctoo: newRelaxationScheme.C
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libwsiFoam.so' is up to date.
+ wmake libso compressibleInterFoam/twoPhaseMixtureThermo
Making dependency list for source file qaleFoam.C
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file twoPhaseMixtureThermo.C
Ctoo: relaxationSchemeEmpty.C
Ctoo: Newmark.C
Ctoo: relaxationSchemeSpatial.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from relaxationZone/relaxationScheme/relaxationScheme.H:63,
from relaxationZone/relaxationScheme/relaxationScheme.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
In file included from lnInclude/convexPolyhedral.H:56:0,
from relaxationZone/relaxationScheme/relaxationScheme.H:63,
from relaxationZone/relaxationScheme/newRelaxationScheme.C:28:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: interpolateForcesAndMoments.C
Ctoo: interpolateAlphaProbes.C
Ctoo: interpolateOvertopping.C
Ctoo: complexExp.C
Ctoo: spectralMethodsFFTBased.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from lnInclude/relaxationScheme.H:63,
from relaxationZone/relaxationScheme/empty/relaxationSchemeEmpty.H:47,
from relaxationZone/relaxationScheme/empty/relaxationSchemeEmpty.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
In file included from lnInclude/convexPolyhedral.H:56:0,
from lnInclude/relaxationScheme.H:63,
from relaxationZone/relaxationScheme/spatial/relaxationSchemeSpatial.H:43,
from relaxationZone/relaxationScheme/spatial/relaxationSchemeSpatial.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: relaxationSchemeSpatialInterpolation.C
In file included from qaleFoam.C:35:0:
/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude/readTimeControls.H: In function ‘int main(int, char**)’:
/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/src/finiteVolume/lnInclude/readTimeControls.H:38:8: warning: unused variable ‘maxDeltaT’ [-Wunused-variable]
scalar maxDeltaT =
^
'/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib/libtwoPhaseMixtureThermoWsiFoam.so' is up to date.
+ wmake
Ctoo: numericalBeach.C
Making dependency list for source file interFoam/CourantNoInterFoam.C
Making dependency list for source file compressibleInterFoam/CourantNoCompressibleInterFoam.C
Making dependency list for source file numericalBeach/numericalBeach.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib/libsixDoFRigidBodyMotionEXT.so
Ctoo: newNumericalBeach.C
Making dependency list for source file ccpWsiFoam.C
wmake waves2Foam
ln: ./lnInclude
Ctoo: numericalBeachEmpty.C
dep: crossVersionCompatibility.C
dep: relaxationZone.C
dep: setWaveField.C
dep: numericalBeachEmpty.C
Ctoo: spectralMethodsLeastSquaresBased.C
Ctoo: powerSpectraFFT.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from lnInclude/relaxationScheme.H:63,
from relaxationZone/relaxationScheme/spatialInterpolation/relaxationSchemeSpatialInterpolation.H:47,
from relaxationZone/relaxationScheme/spatialInterpolation/relaxationSchemeSpatialInterpolation.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
dep: newNumericalBeach.C
dep: numericalBeach.C
dep: relaxationSchemeSpatialInterpolation.C
Ctoo: reflectionAnalysis2DFFT.C
Ctoo: relaxationZone.C
Ctoo: powerSpectraLS.C
dep: relaxationSchemeSpatial.C
dep: relaxationSchemeEmpty.C
dep: newRelaxationScheme.C
dep: relaxationScheme.C
dep: relaxationWeightThirdOrderPolynomial.C
dep: relaxationWeightFreePolynomial.C
dep: relaxationWeightExponential.C
dep: relaxationWeightCourantCorrection.C
dep: relaxationWeight.C
dep: relaxationShapeLine.C
dep: relaxationShapeSemiCylindrical.C
dep: relaxationShapeCylindrical.C
dep: relaxationShapeRectangular.C
dep: relaxationShapeFrozen.C
dep: newRelaxationShape.C
dep: relaxationShape.C
dep: waveVelocityFvPatchVectorField.C
dep: waveAlphaFvPatchScalarField.C
dep: irregularFast.C
dep: oceanWave3D.C
dep: emptyExternal.C
dep: externalWaveForcing.C
dep: externalSource.C
dep: secondOrderCombinedWaves.C
dep: combinedWaves.C
dep: bichromaticSecond.C
dep: bichromaticFirst.C
dep: irregular.C
dep: streamFunction.C
dep: cnoidalFirst.C
dep: stokesFifth.C
dep: stokesSecondModulation.C
dep: stokesSecond.C
dep: stokesFirstStanding.C
dep: stokesFirst.C
dep: chappelear1962.C
dep: solitaryFirst.C
dep: potentialCurrent.C
dep: newWaveTheory.C
dep: waveTheory.C
dep: localCellNeg.C
dep: localCell.C
dep: convexPolyhedral.C
dep: localFace.C
Ctoo: convexPolyhedral.C
Ctoo: localCell.C
Ctoo: localFace.C
Ctoo: localCellNeg.C
Ctoo: setWaveField.C
Ctoo: crossVersionCompatibility.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from lnInclude/relaxationScheme.H:63,
from relaxationZone/relaxationZone.H:44,
from relaxationZone/relaxationZone.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: reflectionAnalysis2DLS.C
In file included from relaxationZone/relaxationZone.C:27:0:
relaxationZone/relaxationZone.H: In constructor ‘Foam::relaxationZone::relaxationZone(const Foam::fvMesh&, Foam::volVectorField&, Foam::volScalarField&)’:
relaxationZone/relaxationZone.H:79:29: warning: ‘Foam::relaxationZone::targetVelocity_’ will be initialized after [-Wreorder]
mutable volVectorField* targetVelocity_;
^
relaxationZone/relaxationZone.H:63:14: warning: ‘Foam::wordList Foam::relaxationZone::relaxNames_’ [-Wreorder]
wordList relaxNames_;
^
relaxationZone/relaxationZone.C:41:1: warning: when initialized here [-Wreorder]
relaxationZone::relaxationZone
^
Ctoo: ensembleAverage.C
In file included from lnInclude/convexPolyhedral.H:56:0,
from setWaveField/setWaveField.H:60,
from setWaveField/setWaveField.C:27:
lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: waveTheory.C
Ctoo: trapz.C
Ctoo: cumTrapz.C
Ctoo: newWaveTheory.C
Ctoo: potentialCurrent.C
Ctoo: solitaryFirst.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libwaves2Foam.so
wmake waves2FoamProcessing
Ctoo: zeroCrossing.C
ln: ./lnInclude
dep: zeroCrossing.C
dep: trapz.C
dep: cumTrapz.C
dep: ensembleAverage.C
dep: reflectionAnalysis2DLS.C
dep: powerSpectraLS.C
In file included from ccpWsiFoam.C:146:0:
./compressibleInterFoam/setRegionFieldsCompressibleInterFoam.H: In function ‘int main(int, char**)’:
./compressibleInterFoam/setRegionFieldsCompressibleInterFoam.H:4:21: warning: unused variable ‘T_transp’ [-Wunused-variable]
volScalarField& T_transp = T_transpCompressibleInterFoam[i];
^
dep: reflectionAnalysis2DFFT.C
dep: powerSpectraFFT.C
dep: spectralMethodsLeastSquaresBased.C
dep: spectralMethodsFFTBased.C
dep: complexExp.C
dep: interpolateOvertopping.C
dep: interpolateAlphaProbes.C
dep: interpolateForcesAndMoments.C
dep: interpolateVelocityProbes.C
dep: interpolateSurfaceElevation.C
dep: removeSubDirs.C
dep: removeData.C
dep: writeIndexLocation.C
dep: write2Ascii.C
dep: rawOvertopping.C
dep: rawAlphaProbes.C
dep: rawForcesAndMoments.C
dep: rawVelocityProbes.C
dep: rawSurfaceElevation.C
dep: postProcessingWaves.C
dep: quadrilateralDistribution.C
dep: circularDistribution.C
dep: lineDistribution.C
dep: userDefinedDistribution.C
dep: pointDistributions.C
dep: probeGauges.C
dep: waveGauges.C
dep: oceanWave3DProperties.C
dep: externalSourceProperties.C
dep: combinedWavesProperties.C
dep: irregularProperties.C
dep: focusingPhase.C
dep: randomPhase.C
dep: phases.C
dep: PiersonMoskowitz.C
dep: JONSWAP.C
dep: cosineStretchedFrequencyAxis.C
dep: equidistantFrequencyAxis.C
dep: frequencyAxis.C
dep: waveSpectra.C
dep: bichromaticSecondProperties.C
dep: bichromaticFirstProperties.C
dep: streamFunctionProperties.C
dep: cnoidalFirstProperties.C
dep: stokesFifthProperties.C
dep: stokesSecondModulationProperties.C
dep: stokesSecondProperties.C
dep: stokesFirstStandingProperties.C
dep: stokesFirstProperties.C
dep: chappelear1962Properties.C
dep: solitaryFirstProperties.C
dep: potentialCurrentProperties.C
dep: setWaveProperties.C
In file included from postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:27:0:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H: In constructor ‘Foam::zeroCrossing::zeroCrossing(const Foam::Time&, const Foam::dictionary&, const Foam::word&)’:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:69:14: warning: ‘Foam::zeroCrossing::crossingType_’ will be initialized after [-Wreorder]
word crossingType_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:64:22: warning: ‘Foam::IOdictionary Foam::zeroCrossing::dataDict_’ [-Wreorder]
IOdictionary dataDict_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:268:1: warning: when initialized here [-Wreorder]
zeroCrossing::zeroCrossing
^
Ctoo: setWaveProperties.C
Ctoo: solitaryFirstProperties.C
Ctoo: potentialCurrentProperties.C
Ctoo: chappelear1962Properties.C
Ctoo: chappelear1962.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamProcessing.so
Ctoo: stokesFirst.C
wmake waves2FoamSampling
ln: ./lnInclude
Ctoo: stokesFirstStanding.C
wmkdep: sampledSurfaceElevation.C
Ctoo: stokesSecond.C
Ctoo: sampledSurfaceElevation.C
Ctoo: stokesFirstProperties.C
Ctoo: stokesFirstStandingProperties.C
Ctoo: stokesSecondProperties.C
Ctoo: stokesSecondModulationProperties.C
Ctoo: stokesSecondModulation.C
Ctoo: stokesFifth.C
Ctoo: cnoidalFirst.C
Ctoo: streamFunction.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamSampling.so
wmake wsiFoam
ln: ./lnInclude
wmkdep: DirichletCoupledValuePointPatchFields.C
Ctoo: DirichletCoupledValuePointPatchFields.C
Ctoo: stokesFifthProperties.C
Ctoo: cnoidalFirstProperties.C
Ctoo: streamFunctionProperties.C
Ctoo: bichromaticFirstProperties.C
Ctoo: irregular.C
Ctoo: bichromaticFirst.C
preProcessing/setWaveProperties/regular/streamFunctionProperties/streamFunctionProperties.C: In member function ‘virtual void Foam::streamFunctionProperties::set(Foam::Ostream&)’:
preProcessing/setWaveProperties/regular/streamFunctionProperties/streamFunctionProperties.C:144:63: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
dimensionedScalar depthNonDim(fentonCoeffs.lookup("depth"));
^
preProcessing/setWaveProperties/regular/streamFunctionProperties/streamFunctionProperties.C:145:65: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
dimensionedScalar periodNonDim(fentonCoeffs.lookup("period"));
^
preProcessing/setWaveProperties/regular/streamFunctionProperties/streamFunctionProperties.C:146:61: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
dimensionedScalar uBarNonDim(fentonCoeffs.lookup("uBar"));
^
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C: In member function ‘Foam::scalar Foam::stokesFifthProperties::waveNumber()’:
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C:82:12: warning: variable ‘valUpper’ set but not used [-Wunused-but-set-variable]
valUpper( eval( upper ) ),
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::lowerMBound_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:57:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::cnoidalFirst_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:74:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
Ctoo: bichromaticSecond.C
Ctoo: combinedWaves.C
Ctoo: bichromaticSecondProperties.C
Ctoo: waveSpectra.C
Ctoo: frequencyAxis.C
Ctoo: equidistantFrequencyAxis.C
Ctoo: secondOrderCombinedWaves.C
Ctoo: externalSource.C
Ctoo: externalWaveForcing.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libwsiFoam.so
wmake finiteVolumeWsiFoam
ln: ./lnInclude
wmkdep: numericalBeachWsiFoamFvPatchField.C
wmkdep: linearWaveFvPatchFields.C
wmkdep: linearWaveVelocityFvPatchField.C
wmkdep: zZeroGradientFvPatchFields.C
wmkdep: zmappedDirichletCoupledValueFvPatchFields.C
wmkdep: NeumannCoupledValueFvPatchFields.C
wmkdep: DirichletCoupledValueFvPatchFields.C
wmkdep: mappedDirichletCoupledFvPatchFields.C
wmkdep: NeumannCoupledFvPatchFields.C
wmkdep: DirichletCoupledFvPatchFields.C
Ctoo: DirichletCoupledFvPatchFields.C
Ctoo: mappedDirichletCoupledFvPatchFields.C
Ctoo: NeumannCoupledFvPatchFields.C
Ctoo: DirichletCoupledValueFvPatchFields.C
Ctoo: cosineStretchedFrequencyAxis.C
Ctoo: JONSWAP.C
Ctoo: emptyExternal.C
Ctoo: PiersonMoskowitz.C
Ctoo: phases.C
Ctoo: oceanWave3D.C
Ctoo: randomPhase.C
Ctoo: irregularFast.C
Ctoo: focusingPhase.C
Ctoo: irregularProperties.C
Ctoo: combinedWavesProperties.C
Ctoo: waveAlphaFvPatchScalarField.C
Ctoo: waveVelocityFvPatchVectorField.C
waveTheories/externalWaveForcing/irregularFast/irregularFast.C: In member function ‘Foam::scalar Foam::waveTheories::irregularFast::interpolateSurfaceElevation(const point&, const scalar&, const label&, const label&) const’:
waveTheories/externalWaveForcing/irregularFast/irregularFast.C:620:9: warning: unused variable ‘y’ [-Wunused-variable]
scalar y = (p & eY_);
^
Ctoo: externalSourceProperties.C
Ctoo: oceanWave3DProperties.C
Ctoo: waveGauges.C
Ctoo: probeGauges.C
Making dependency list for source file setQaleWave.C
preProcessing/probes/probeGauges/probeGauges.C: In member function ‘void Foam::probeGauges::evaluate(const Foam::word&)’:
preProcessing/probes/probeGauges/probeGauges.C:97:8: warning: unused variable ‘interval’ [-Wunused-variable]
label interval(readLabel(gaugeDict_.lookup("outputInterval")));
^
Ctoo: relaxationShape.C
Ctoo: newRelaxationShape.C
[Pipeline] sh
Ctoo: pointDistributions.C
+ module load gcc openmpi openfoam/2.3.0
+ set +x
+ source ./setup
++ '[' -z x ']'
++++ dirname ./setup
+++ cd .
+++ pwd
++ export WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230
++ WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230
++ export FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/bin
++ FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/bin
++ export FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib
++ FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib
++ export PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/bin:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/wmake:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/bin:/opt/software/gcc-system/openmpi/1.10.0/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/bin
++ PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/bin:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/wmake:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/bin:/opt/software/gcc-system/openmpi/1.10.0/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/bin
++ export LD_LIBRARY_PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/ThirdParty-2.3.0/platforms/linux64GccDPOpt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/ThirdParty-2.3.0/platforms/linux64GccDPOpt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib/dummy:/opt/software/gcc-system/openmpi/1.10.0/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib
++ LD_LIBRARY_PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/ThirdParty-2.3.0/platforms/linux64GccDPOpt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/ThirdParty-2.3.0/platforms/linux64GccDPOpt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/platforms/linux64GccDPOpt/lib/dummy:/opt/software/gcc-system/openmpi/1.10.0/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/platforms/linux64GccDPOpt/lib
+ cd tutorials
+ foamRunTutorials -test -skipFirst
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/qaleDyMFoam2D'
Ctoo: userDefinedDistribution.C
Ctoo: lineDistribution.C
Ctoo: circularDistribution.C
Ctoo: relaxationShapeFrozen.C
Ctoo: relaxationShapeRectangular.C
Ctoo: NeumannCoupledValueFvPatchFields.C
Ctoo: zmappedDirichletCoupledValueFvPatchFields.C
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeFrozen::pointSet()’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:178:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeFrozen::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/frozen/relaxationShapeFrozen.C:188:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: relaxationShapeCylindrical.C
In file included from fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.H:188:0,
from fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.H:29,
from fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:26:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C: In instantiation of ‘void Foam::NeumannCoupledValueFvPatchField<Type>::updateCoeffs() [with Type = Foam::Tensor<double>]’:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:41:1: required from here
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C:234:26: warning: unused variable ‘distMap’ [-Wunused-variable]
const mapDistribute& distMap = mpp.map();
^
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C: In instantiation of ‘void Foam::NeumannCoupledValueFvPatchField<Type>::updateCoeffs() [with Type = Foam::SymmTensor<double>]’:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:41:1: required from here
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C:234:26: warning: unused variable ‘distMap’ [-Wunused-variable]
Ctoo: quadrilateralDistribution.C
Ctoo: postProcessingWaves.C
Ctoo: relaxationShapeSemiCylindrical.C
Ctoo: rawSurfaceElevation.C
Ctoo: rawVelocityProbes.C
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C: In instantiation of ‘void Foam::NeumannCoupledValueFvPatchField<Type>::updateCoeffs() [with Type = Foam::SphericalTensor<double>]’:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:41:1: required from here
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C:234:26: warning: unused variable ‘distMap’ [-Wunused-variable]
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C: In instantiation of ‘void Foam::NeumannCoupledValueFvPatchField<Type>::updateCoeffs() [with Type = Foam::Vector<double>]’:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:41:1: required from here
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C:234:26: warning: unused variable ‘distMap’ [-Wunused-variable]
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C: In instantiation of ‘void Foam::NeumannCoupledValueFvPatchField<Type>::updateCoeffs() [with Type = double]’:
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchFields.C:41:1: required from here
fields/fvPatchFields/derived/NeumannCoupledValue/NeumannCoupledValueFvPatchField.C:234:26: warning: unused variable ‘distMap’ [-Wunused-variable]
Ctoo: relaxationShapeLine.C
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeRectangular::pointSet()’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:183:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeRectangular::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/rectangular/relaxationShapeRectangular.C:193:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeCylindrical::pointSet()’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:139:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/cylindrical/relaxationShapeCylindrical.C:149:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual const pointField& Foam::relaxationShapes::relaxationShapeSemiCylindrical::pointSet()’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:182:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C: In member function ‘virtual Foam::scalar Foam::relaxationShapes::relaxationShapeSemiCylindrical::interpolation(const scalarField&, const point&) const’:
relaxationZone/relaxationShape/semiCylindrical/relaxationShapeSemiCylindrical.C:192:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Ctoo: rawForcesAndMoments.C
Ctoo: zZeroGradientFvPatchFields.C
Ctoo: rawAlphaProbes.C
Ctoo: relaxationWeight.C
Ctoo: relaxationWeightCourantCorrection.C
Ctoo: linearWaveFvPatchFields.C
Ctoo: relaxationWeightExponential.C
Ctoo: rawOvertopping.C
Ctoo: write2Ascii.C
Ctoo: relaxationWeightFreePolynomial.C
Ctoo: writeIndexLocation.C
Ctoo: removeData.C
Ctoo: removeSubDirs.C
Ctoo: relaxationWeightThirdOrderPolynomial.C
Ctoo: relaxationScheme.C
Ctoo: newRelaxationScheme.C
Ctoo: interpolateSurfaceElevation.C
Ctoo: relaxationSchemeEmpty.C
Ctoo: interpolateVelocityProbes.C
Ctoo: interpolateForcesAndMoments.C
Ctoo: interpolateAlphaProbes.C
Ctoo: linearWaveVelocityFvPatchField.C
Ctoo: relaxationSchemeSpatial.C
Ctoo: relaxationSchemeSpatialInterpolation.C
Ctoo: numericalBeach.C
Ctoo: interpolateOvertopping.C
Ctoo: newNumericalBeach.C
Ctoo: complexExp.C
Ctoo: spectralMethodsFFTBased.C
Ctoo: spectralMethodsLeastSquaresBased.C
Ctoo: powerSpectraFFT.C
Ctoo: numericalBeachEmpty.C
Ctoo: numericalBeachWsiFoamFvPatchField.C
Ctoo: reflectionAnalysis2DFFT.C
Ctoo: relaxationZone.C
Ctoo: setWaveField.C
Ctoo: crossVersionCompatibility.C
In file included from relaxationZone/relaxationZone.C:27:0:
relaxationZone/relaxationZone.H: In constructor ‘Foam::relaxationZone::relaxationZone(const Foam::fvMesh&, Foam::volVectorField&, Foam::volScalarField&)’:
relaxationZone/relaxationZone.H:79:29: warning: ‘Foam::relaxationZone::targetVelocity_’ will be initialized after [-Wreorder]
mutable volVectorField* targetVelocity_;
^
relaxationZone/relaxationZone.H:63:14: warning: ‘Foam::wordList Foam::relaxationZone::relaxNames_’ [-Wreorder]
wordList relaxNames_;
^
relaxationZone/relaxationZone.C:41:1: warning: when initialized here [-Wreorder]
relaxationZone::relaxationZone
^
Ctoo: powerSpectraLS.C
Ctoo: reflectionAnalysis2DLS.C
Ctoo: ensembleAverage.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libfiniteVolumeWsiFoam.so
wmake sixDoFRigidBodyMotionEXT
ln: ./lnInclude
wmkdep: CrankNicolson.C
wmkdep: Newmark.C
wmkdep: newSixDoFSolver.C
wmkdep: symplectic.C
wmkdep: sixDoFSolver.C
wmkdep: sixDoFRigidBodyMotionSolver.C
wmkdep: sixDoFRigidBodyMotionPointConstraint.C
wmkdep: sixDoFRigidBodyMotionPlaneConstraint.C
wmkdep: sixDoFRigidBodyMotionOrientationConstraint.C
wmkdep: sixDoFRigidBodyMotionLineConstraint.C
wmkdep: sixDoFRigidBodyMotionAxisConstraint.C
wmkdep: sixDoFRigidBodyMotionConstraintNew.C
wmkdep: sixDoFRigidBodyMotionConstraint.C
wmkdep: endStop.C
wmkdep: sphericalAngularDamper.C
Ctoo: trapz.C
wmkdep: linearDamper.C
wmkdep: tabulatedAxialAngularSpring.C
wmkdep: sphericalAngularSpring.C
wmkdep: linearSpring.C
wmkdep: linearAxialAngularSpring.C
wmkdep: sixDoFRigidBodyMotionRestraint.C
wmkdep: sixDoFRigidBodyMotionRestraintNew.C
wmkdep: sixDoFRigidBodyMotionStateIO.C
wmkdep: sixDoFRigidBodyMotionState.C
wmkdep: sixDoFRigidBodyMotionIO.C
wmkdep: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotion.C
Ctoo: sixDoFRigidBodyMotionState.C
Ctoo: sixDoFRigidBodyMotionIO.C
Ctoo: sixDoFRigidBodyMotionStateIO.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib/libwaves2Foam.so
wmake waves2FoamProcessing
Ctoo: sixDoFRigidBodyMotionRestraint.C
Ctoo: sixDoFRigidBodyMotionRestraintNew.C
Ctoo: cumTrapz.C
Ctoo: linearAxialAngularSpring.C
Ctoo: zeroCrossing.C
ln: ./lnInclude
dep: zeroCrossing.C
dep: cumTrapz.C
dep: ensembleAverage.C
dep: trapz.C
dep: reflectionAnalysis2DLS.C
dep: powerSpectraLS.C
dep: reflectionAnalysis2DFFT.C
dep: powerSpectraFFT.C
dep: spectralMethodsLeastSquaresBased.C
dep: spectralMethodsFFTBased.C
dep: complexExp.C
dep: interpolateOvertopping.C
dep: interpolateAlphaProbes.C
Ctoo: linearSpring.C
dep: interpolateVelocityProbes.C
dep: interpolateForcesAndMoments.C
dep: interpolateSurfaceElevation.C
dep: removeSubDirs.C
dep: removeData.C
dep: writeIndexLocation.C
dep: write2Ascii.C
dep: rawOvertopping.C
dep: rawAlphaProbes.C
dep: rawForcesAndMoments.C
dep: rawVelocityProbes.C
dep: rawSurfaceElevation.C
dep: postProcessingWaves.C
dep: quadrilateralDistribution.C
dep: circularDistribution.C
dep: lineDistribution.C
dep: userDefinedDistribution.C
dep: pointDistributions.C
dep: probeGauges.C
dep: waveGauges.C
dep: oceanWave3DProperties.C
dep: externalSourceProperties.C
dep: secondOrderCombinedWavesProperties.C
dep: combinedWavesProperties.C
Ctoo: sphericalAngularSpring.C
Ctoo: tabulatedAxialAngularSpring.C
dep: irregularProperties.C
dep: NewWave.C
dep: noScaling.C
dep: scaling.C
dep: focusingPhase.C
dep: phases.C
dep: randomPhase.C
dep: PiersonMoskowitz.C
dep: JONSWAP.C
dep: cosineStretchedFrequencyAxis.C
dep: frequencyAxis.C
dep: equidistantFrequencyAxis.C
dep: waveSpectra.C
dep: bichromaticSecondProperties.C
dep: bichromaticFirstProperties.C
dep: streamFunctionProperties.C
dep: cnoidalFirstProperties.C
dep: stokesFifthProperties.C
dep: stokesSecondModulationProperties.C
dep: stokesSecondProperties.C
Ctoo: linearDamper.C
dep: stokesFirstStandingProperties.C
dep: stokesFirstProperties.C
dep: chappelear1962Properties.C
dep: solitaryFirstProperties.C
dep: setWaveProperties.C
dep: potentialCurrentProperties.C
Ctoo: setWaveProperties.C
Ctoo: solitaryFirstProperties.C
Ctoo: potentialCurrentProperties.C
Ctoo: chappelear1962Properties.C
Ctoo: sphericalAngularDamper.C
In file included from postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:27:0:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H: In constructor ‘Foam::zeroCrossing::zeroCrossing(const Foam::Time&, const Foam::dictionary&, const Foam::word&)’:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:69:14: warning: ‘Foam::zeroCrossing::crossingType_’ will be initialized after [-Wreorder]
word crossingType_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:64:22: warning: ‘Foam::IOdictionary Foam::zeroCrossing::dataDict_’ [-Wreorder]
IOdictionary dataDict_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:268:1: warning: when initialized here [-Wreorder]
zeroCrossing::zeroCrossing
^
Ctoo: endStop.C
Ctoo: sixDoFRigidBodyMotionConstraint.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamProcessing.so
wmake waves2FoamSamplingNew
Ctoo: sixDoFRigidBodyMotionConstraintNew.C
ln: ./lnInclude
dep: overtopping.C
dep: sampledSurfaceElevation.C
Ctoo: sixDoFRigidBodyMotionAxisConstraint.C
Ctoo: sixDoFRigidBodyMotionLineConstraint.C
Ctoo: sixDoFRigidBodyMotionOrientationConstraint.C
Ctoo: sampledSurfaceElevation.C
Ctoo: overtopping.C
Ctoo: sixDoFRigidBodyMotionPlaneConstraint.C
Ctoo: sixDoFRigidBodyMotionPointConstraint.C
Ctoo: sixDoFRigidBodyMotionSolver.C
Ctoo: sixDoFSolver.C
overtopping/overtopping.C: In member function ‘virtual bool Foam::overtopping::write()’:
overtopping/overtopping.C:242:9: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
).value();
^
overtopping/overtopping.C:249:9: warning: ‘Foam::dimensioned<Type>::dimensioned(Foam::Istream&) [with Type = double]’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/dimensionedType.C:235): Since 2018-11 [-Wdeprecated-declarations]
).value();
^
Ctoo: stokesFirstProperties.C
Ctoo: stokesFirstStandingProperties.C
Ctoo: stokesSecondProperties.C
Ctoo: newSixDoFSolver.C
Ctoo: symplectic.C
Ctoo: stokesSecondModulationProperties.C
Ctoo: CrankNicolson.C
Ctoo: Newmark.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamSampling.so
wmake solvers
wmake waveFoam
dep: waveFoam.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libsixDoFRigidBodyMotionEXT.so
wmake qaleFoam
Ctoo: stokesFifthProperties.C
Ctoo: cnoidalFirstProperties.C
Ctoo: streamFunctionProperties.C
ln: ./lnInclude
Ctoo: bichromaticFirstProperties.C
wmkdep: qaleAbsorberVelocityFvPatchField.C
wmkdep: qaleAbsorberAlphaFvPatchField.C
wmkdep: qaleWavePressureFvPatchField.C
wmkdep: qaleWaveVelocityFvPatchField.C
wmkdep: qaleAbsorberProperties.C
wmkdep: qaleWaveAlphaFvPatchField.C
wmkdep: qaleAbsorber.C
wmkdep: qaleEKFSampler.C
wmkdep: qaleRunTimeSampler.C
wmkdep: qaleElevation.C
wmkdep: qaleLineSetSampler.C
wmkdep: qaleLineSampler.C
wmkdep: qaleMidPointAndFaceSet.C
wmkdep: qaleMidPointSet.C
wmkdep: qaleFaceSet.C
wmkdep: qaleUniformSet.C
wmkdep: qaleSampledSet.C
wmkdep: qaleProbes.C
wmkdep: qalePatchProbes.C
wmkdep: qaleSamplingFields.C
wmkdep: qaleTranslationalZone.C
wmkdep: transEffectDamping.C
wmkdep: transEffectBeach.C
wmkdep: transEffectWave.C
wmkdep: transEffect.C
wmkdep: zoneWeightingPolynomial.C
wmkdep: zoneWeightingCosine.C
wmkdep: zoneWeightingExponential.C
wmkdep: zoneWeighting.C
wmkdep: zoneShapePatch.C
wmkdep: zoneShapePointSet.C
wmkdep: zoneShapePolyLineDist.C
wmkdep: zoneShapeLineDist.C
wmkdep: zoneShapeCylinder.C
wmkdep: zoneShapeRectangular.C
wmkdep: zoneShape.C
Ctoo: waveFoam.C
wmkdep: qaleWaveField.C
wmkdep: initFnpt2D.C
wmkdep: initQaleSecondOrder.C
wmkdep: initQaleStokes.C
wmkdep: initQaleLinear.C
wmkdep: initQaleCurrent.C
wmkdep: initQaleWaveTheories.C
wmkdep: fnpt2D.C
wmkdep: qale2DWave.C
wmkdep: secondOrderWave.C
wmkdep: qaleStokes.C
wmkdep: qaleLinear.C
wmkdep: qaleCurrent.C
wmkdep: newQaleWaveTheories.C
wmkdep: qaleWaveTheories.C
wmkdep: qaleLevelSet.C
wmkdep: cutCell.C
wmkdep: qaleDataHandler.C
Ctoo: qaleDataHandler.C
Ctoo: qaleLevelSet.C
Ctoo: cutCell.C
Ctoo: qaleWaveTheories.C
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C: In member function ‘Foam::scalar Foam::stokesFifthProperties::waveNumber()’:
preProcessing/setWaveProperties/regular/stokesFifthProperties/stokesFifthProperties.C:82:12: warning: variable ‘valUpper’ set but not used [-Wunused-but-set-variable]
valUpper( eval( upper ) ),
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::lowerMBound_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:57:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C: In function ‘double Foam::cnoidalFirst_f(double, void*)’:
preProcessing/setWaveProperties/regular/cnoidalFirstProperties/cnoidalFirstProperties.C:74:67: warning: use of old-style cast [-Wold-style-cast]
struct cnoidalFirstParams *p = (struct cnoidalFirstParams * ) params;
^
In file included from /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/convexPolyhedral.H:56:0,
from /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/relaxationScheme.H:63,
from /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/relaxationZone.H:44,
from waveFoam.C:54:
/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: bichromaticSecondProperties.C
Ctoo: waveSpectra.C
Ctoo: frequencyAxis.C
Ctoo: equidistantFrequencyAxis.C
Ctoo: newQaleWaveTheories.C
Ctoo: qaleCurrent.C
Ctoo: qaleLinear.C
Ctoo: qaleStokes.C
Ctoo: secondOrderWave.C
Ctoo: qale2DWave.C
Ctoo: cosineStretchedFrequencyAxis.C
Ctoo: JONSWAP.C
Ctoo: PiersonMoskowitz.C
Ctoo: phases.C
Ctoo: fnpt2D.C
Ctoo: initQaleWaveTheories.C
Ctoo: initQaleCurrent.C
Ctoo: initQaleLinear.C
Ctoo: initQaleStokes.C
Ctoo: initQaleSecondOrder.C
Ctoo: initFnpt2D.C
Ctoo: randomPhase.C
Ctoo: focusingPhase.C
Ctoo: scaling.C
Ctoo: noScaling.C
Ctoo: qaleWaveField.C
Ctoo: zoneShape.C
Ctoo: zoneShapeRectangular.C
Ctoo: NewWave.C
Ctoo: zoneShapeCylinder.C
Ctoo: irregularProperties.C
Ctoo: combinedWavesProperties.C
Ctoo: secondOrderCombinedWavesProperties.C
Ctoo: zoneShapeLineDist.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/waveFoam
wmake utilities
wmake setWaveField
wmake postProcessWaves2Foam
wmake relaxationZoneLayout
wmake setWaveParameters
dep: postProcessWaves2Foam.C
dep: relaxationZoneLayout.C
dep: setWaveField.C
dep: setWaveParameters.C
Ctoo: setWaveParameters.C
Ctoo: postProcessWaves2Foam.C
Ctoo: setWaveField.C
Ctoo: relaxationZoneLayout.C
Ctoo: zoneShapePolyLineDist.C
Ctoo: zoneShapePointSet.C
Ctoo: zoneShapePatch.C
In file included from /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/convexPolyhedral.H:56:0,
from /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/setWaveField.H:60,
from setWaveField.C:73:
/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/localCell.H: In member function ‘Foam::vector Foam::localCell::fnormal(Foam::label) const’:
/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/libraries/waves2Foam/lnInclude/localCell.H:207:41: warning: ‘Foam::vector Foam::face::normal(const Foam::UList<Foam::Vector<double> >&) const’ is deprecated (declared at /opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/OpenFOAM/lnInclude/face.H:206): Since 2018-12; use "areaNormal() or unitNormal()" [-Wdeprecated-declarations]
return fL_[faceI].normal(pp_);
^
Ctoo: zoneWeighting.C
Ctoo: zoneWeightingExponential.C
Ctoo: zoneWeightingCosine.C
Ctoo: zoneWeightingPolynomial.C
Ctoo: externalSourceProperties.C
Ctoo: oceanWave3DProperties.C
Ctoo: waveGauges.C
Ctoo: probeGauges.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/postProcessWaves2Foam
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/setWaveParameters
wmake waveGaugesNProbes
Ctoo: transEffect.C
dep: waveGaugesNProbes.C
Ctoo: transEffectWave.C
Ctoo: transEffectBeach.C
Ctoo: transEffectDamping.C
Ctoo: waveGaugesNProbes.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/relaxationZoneLayout
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/setWaveField
preProcessing/probes/probeGauges/probeGauges.C: In member function ‘void Foam::probeGauges::evaluate(const Foam::word&)’:
preProcessing/probes/probeGauges/probeGauges.C:97:8: warning: unused variable ‘interval’ [-Wunused-variable]
label interval(readLabel(gaugeDict_.lookup("outputInterval")));
^
Ctoo: pointDistributions.C
In file included from waveGaugesNProbes.C:78:0:
/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/finiteVolume/lnInclude/readGravitationalAcceleration.H: In function ‘int main(int, char**)’:
/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/src/finiteVolume/lnInclude/readGravitationalAcceleration.H:2:29: warning: unused variable ‘g’ [-Wunused-variable]
const meshObjects::gravity& g = meshObjects::gravity::New(runTime);
^
Ctoo: userDefinedDistribution.C
Ctoo: lineDistribution.C
Ctoo: circularDistribution.C
Ctoo: qaleTranslationalZone.C
Ctoo: qaleSamplingFields.C
Ctoo: qaleProbes.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin/waveGaugesNProbes
[Pipeline] sh
Ctoo: qalePatchProbes.C
+ module load openmpi openfoam/v1906
+ set +x
+ source ./setup
++ '[' -z x ']'
++++ dirname ./setup
+++ cd .
+++ pwd
++ export WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906
++ WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906
++ export FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin
++ FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin
++ export FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib
++ FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib
++ export MOODY_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux
++ MOODY_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux
++ export MOODY_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/bin
++ MOODY_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/bin
++ export MOODY_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/lib
++ MOODY_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/lib
++ export PATH=/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/bin:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/bin:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/wmake:/opt/software/openmpi/1.10/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/bin
++ PATH=/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/bin:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/bin:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/wmake:/opt/software/openmpi/1.10/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/bin
++ export LD_LIBRARY_PATH=/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/fftw-3.3.7/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/CGAL-4.9.1/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/boost_1_64_0/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64GccDPInt32/lib:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/openmpi/1.10/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/lib
++ LD_LIBRARY_PATH=/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/fftw-3.3.7/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/CGAL-4.9.1/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64Gcc/boost_1_64_0/lib64:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/openfoam/v1906-openmpi-1.10/ThirdParty-v1906/platforms/linux64GccDPInt32/lib:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib:/opt/software/openfoam/v1906-openmpi-1.10/OpenFOAM-v1906/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/openmpi/1.10/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/platforms/linux64GccDPInt32Opt/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/../third_party/moody/moody-2.0.0-Linux/lib
+ cd tutorials
+ foamRunTutorials -test -skipFirst
Cleaning case /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Running topoSet on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Running subsetMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Restore 0/ from 0.orig/
Running setFields on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Running decomposePar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Running interFoam (4 processes) on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Ctoo: qaleSampledSet.C
Ctoo: qaleUniformSet.C
Ctoo: quadrilateralDistribution.C
Ctoo: postProcessingWaves.C
Ctoo: rawSurfaceElevation.C
Ctoo: rawVelocityProbes.C
Ctoo: qaleFaceSet.C
Ctoo: qaleMidPointSet.C
Ctoo: rawForcesAndMoments.C
Ctoo: rawAlphaProbes.C
Ctoo: rawOvertopping.C
Ctoo: write2Ascii.C
Ctoo: qaleMidPointAndFaceSet.C
Ctoo: qaleLineSampler.C
Ctoo: writeIndexLocation.C
Ctoo: removeData.C
Ctoo: qaleLineSetSampler.C
Ctoo: removeSubDirs.C
Ctoo: interpolateSurfaceElevation.C
Ctoo: interpolateVelocityProbes.C
Ctoo: qaleElevation.C
Ctoo: interpolateForcesAndMoments.C
Ctoo: interpolateAlphaProbes.C
Ctoo: qaleRunTimeSampler.C
Ctoo: interpolateOvertopping.C
Ctoo: qaleEKFSampler.C
Ctoo: complexExp.C
Ctoo: spectralMethodsFFTBased.C
Ctoo: qaleAbsorber.C
Ctoo: spectralMethodsLeastSquaresBased.C
Ctoo: powerSpectraFFT.C
Ctoo: qaleAbsorberProperties.C
Ctoo: reflectionAnalysis2DFFT.C
Ctoo: qaleWaveAlphaFvPatchField.C
Ctoo: qaleWaveVelocityFvPatchField.C
Ctoo: qaleWavePressureFvPatchField.C
Ctoo: powerSpectraLS.C
Ctoo: reflectionAnalysis2DLS.C
Ctoo: qaleAbsorberAlphaFvPatchField.C
Ctoo: ensembleAverage.C
Ctoo: qaleAbsorberVelocityFvPatchField.C
Ctoo: trapz.C
Ctoo: cumTrapz.C
Ctoo: zeroCrossing.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libqalefoam.so
wmake incompressibleTurbulenceModelsWsiFoam
ln: ./lnInclude
wmkdep: laminarIncompressibleWsiFoam.C
wmkdep: turbulenceModelIncompressibleWsiFoam.C
Ctoo: turbulenceModelIncompressibleWsiFoam.C
Ctoo: laminarIncompressibleWsiFoam.C
In file included from postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:27:0:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H: In constructor ‘Foam::zeroCrossing::zeroCrossing(const Foam::Time&, const Foam::dictionary&, const Foam::word&)’:
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:69:14: warning: ‘Foam::zeroCrossing::crossingType_’ will be initialized after [-Wreorder]
word crossingType_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.H:64:22: warning: ‘Foam::IOdictionary Foam::zeroCrossing::dataDict_’ [-Wreorder]
IOdictionary dataDict_;
^
postProcessing/postProcessingWaves/miscOperations/zeroCrossing/zeroCrossing.C:268:1: warning: when initialized here [-Wreorder]
zeroCrossing::zeroCrossing
^
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamProcessing.so
wmake waves2FoamSamplingNew
ln: ./lnInclude
dep: overtopping.C
dep: sampledSurfaceElevation.C
Ctoo: sampledSurfaceElevation.C
Ctoo: overtopping.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libincompressibleTurbulenceModelsWsiFoam.so
wmake compressibleTurbulenceModelsWsiFoam
ln: ./lnInclude
wmkdep: laminarCompressibleWsiFoam.C
wmkdep: turbulenceModelCompressibleWsiFoam.C
Ctoo: laminarCompressibleWsiFoam.C
Ctoo: turbulenceModelCompressibleWsiFoam.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib/libwaves2FoamSampling.so
wmake solvers
wmake waveIsoFoam
wmake waveFoam
dep: waveFoam.C
dep: waveIsoFoam.C
Ctoo: waveIsoFoam.C
Ctoo: waveFoam.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libcompressibleTurbulenceModelsWsiFoam.so
wmake dynamicFvMeshNEW
ln: ./lnInclude
wmkdep: cnoidalWaveMakerFvMesh.C
wmkdep: periodicSechSquaredSolitaryWaveMakerFvMesh.C
wmkdep: pistonWaveMakerFvMesh.C
wmkdep: sechSquaredSolitaryWaveMakerFvMesh.C
wmkdep: pistonFvMesh.C
wmkdep: flapWaveMakerFvMesh.C
Ctoo: flapWaveMakerFvMesh.C
Ctoo: pistonWaveMakerFvMesh.C
Ctoo: pistonFvMesh.C
Ctoo: sechSquaredSolitaryWaveMakerFvMesh.C
Ctoo: periodicSechSquaredSolitaryWaveMakerFvMesh.C
Ctoo: cnoidalWaveMakerFvMesh.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libdynamicFvMeshNEW.so
wmake stabRAS_OF50
ln: ./lnInclude
wmkdep: makeTurbModel.C
Ctoo: makeTurbModel.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/waveIsoFoam
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/waveFoam
wmake utilities
wmake faceSetToSTL
wmake postProcessWaves2Foam
wmake relaxationZoneLayout
wmake sampleIncidentWaveField
dep: faceSetToSTL.C
dep: sampleIncidentWaveField.C
dep: relaxationZoneLayout.C
dep: postProcessWaves2Foam.C
Ctoo: faceSetToSTL.C
Ctoo: postProcessWaves2Foam.C
Ctoo: relaxationZoneLayout.C
Ctoo: sampleIncidentWaveField.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libstabRASModels.so
wmake solvers
wmake waveDyMFoam
wmake ccpWsiFoam
wmake qaleDyMFoam2D
wmake waveFoam
+ wmake libso compressibleInterFoam/twoPhaseMixtureThermo
wmake libso compressibleInterFoam/twoPhaseMixtureThermo
wmkdep: waveDyMFoam.C
wmkdep: waveFoam.C
wmkdep: qaleDyMFoam2D.C
ln: ./lnInclude
wmkdep: twoPhaseMixtureThermo.C
sampleIncidentWaveField.C: In function ‘int main(int, char**)’:
sampleIncidentWaveField.C:227:11: warning: unused variable ‘count’ [-Wunused-variable]
label count = 0;
^
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/faceSetToSTL
wmake setWaveField
Ctoo: twoPhaseMixtureThermo.C
Ctoo: waveDyMFoam.C
Ctoo: waveFoam.C
Ctoo: qaleDyMFoam2D.C
dep: setWaveField.C
Ctoo: setWaveField.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/postProcessWaves2Foam
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/sampleIncidentWaveField
wmake setWaveParameters
dep: setWaveParameters.C
wmake waveGaugesNProbes
Ctoo: setWaveParameters.C
dep: waveGaugesNProbes.C
Ctoo: waveGaugesNProbes.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/relaxationZoneLayout
In file included from waveGaugesNProbes.C:78:0:
/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/src/finiteVolume/lnInclude/readGravitationalAcceleration.H: In function ‘int main(int, char**)’:
/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/src/finiteVolume/lnInclude/readGravitationalAcceleration.H:2:29: warning: unused variable ‘g’ [-Wunused-variable]
const meshObjects::gravity& g = meshObjects::gravity::New(runTime);
^
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib/libtwoPhaseMixtureThermoWsiFoam.so
+ wmake
wmkdep: ccpWsiFoam.C
wmkdep: CourantNoMultiRegion.C
wmkdep: numericalBeachWsiFoam.C
Ctoo: numericalBeachWsiFoam.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/setWaveParameters
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/setWaveField
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin/waveGaugesNProbes
[Pipeline] sh
+ module load openmpi openfoam/v1812
+ set +x
+ source ./setup
++ '[' -z x ']'
++++ dirname ./setup
+++ cd .
+++ pwd
++ export WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812
++ WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812
++ export FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin
++ FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin
++ export FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib
++ FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib
++ export PATH=/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/bin:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/bin:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/wmake:/opt/software/openmpi/1.10/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin
++ PATH=/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/bin:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/bin:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/wmake:/opt/software/openmpi/1.10/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/bin
++ export LD_LIBRARY_PATH=/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/fftw-3.3.7/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/CGAL-4.9.1/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/boost_1_64_0/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64GccDPInt32/lib:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/openmpi/1.10/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib
++ LD_LIBRARY_PATH=/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/fftw-3.3.7/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/CGAL-4.9.1/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64Gcc/boost_1_64_0/lib64:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/openfoam/v1812-openmpi-1.10/ThirdParty-v1812/platforms/linux64GccDPInt32/lib:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib:/opt/software/openfoam/v1812-openmpi-1.10/OpenFOAM-v1812/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/openmpi/1.10/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/platforms/linux64GccDPInt32Opt/lib
+ cd tutorials
+ foamRunTutorials -test -skipFirst
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
Running waveGaugesNProbes on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
Running setWaveParameters on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
Running waveFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
Ctoo: CourantNoMultiRegion.C
Ctoo: ccpWsiFoam.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/waveFoam
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/waveDyMFoam
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/qaleDyMFoam2D
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/ccpWsiFoam
wmake utilities
wmake faceSetToSTL
wmake sampleIncidentWaveField
wmake relaxationZoneLayout
wmake setQaleWave
wmkdep: faceSetToSTL.C
wmkdep: relaxationZoneLayout.C
wmkdep: setQaleWave.C
wmkdep: sampleIncidentWaveField.C
could not open file foamTime.H for source file relaxationZoneLayout.C due to No such file or directory
could not open file foamTime.H for source file faceSetToSTL.C due to No such file or directory
Ctoo: faceSetToSTL.C
Ctoo: setQaleWave.C
Ctoo: sampleIncidentWaveField.C
Ctoo: relaxationZoneLayout.C
sampleIncidentWaveField.C: In function ‘int main(int, char**)’:
sampleIncidentWaveField.C:169:11: warning: unused variable ‘count’ [-Wunused-variable]
label count = 0;
^
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/faceSetToSTL
wmake setWaveField
wmkdep: setWaveField.C
Ctoo: setWaveField.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/sampleIncidentWaveField
wmake setWaveParameters
wmkdep: setWaveParameters.C
Ctoo: setWaveParameters.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/relaxationZoneLayout
wmake waveGaugesNProbes
wmkdep: waveGaugesNProbes.C
could not open file foamTime.H for source file waveGaugesNProbes.C due to No such file or directory
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/setQaleWave
Ctoo: waveGaugesNProbes.C
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/setWaveParameters
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/waveGaugesNProbes
ld: /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin/setWaveField
[Pipeline] sh
+ module load gcc openmpi openfoam/5.0
+ set +x
+ source ./setup
++ '[' -z x ']'
++++ dirname ./setup
+++ cd .
+++ pwd
++ export WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50
++ WM_PROJECT_USER_DIR=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50
++ export FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin
++ FOAM_USER_APPBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin
++ export FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib
++ FOAM_USER_LIBBIN=/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib
++ export PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/bin:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/wmake:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/bin:/opt/software/gcc-system/openmpi/1.10.0/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin
++ PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/bin:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/wmake:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/bin:/opt/software/gcc-system/openmpi/1.10.0/bin:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/bin
++ export LD_LIBRARY_PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/ThirdParty-5.0/platforms/linux64GccDPInt32/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/ThirdParty-5.0/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/gcc-system/openmpi/1.10.0/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib
++ LD_LIBRARY_PATH=/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/ThirdParty-5.0/platforms/linux64GccDPInt32/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/ThirdParty-5.0/platforms/linux64GccDPInt32/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib/openmpi-system:/opt/software/gcc-system/openmpi-1.10.0/openfoam/5.0/OpenFOAM-5.0/platforms/linux64GccDPInt32Opt/lib/dummy:/opt/software/gcc-system/openmpi/1.10.0/lib:/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/platforms/linux64GccDPInt32Opt/lib
+ cd tutorials
+ foamRunTutorials -test -skipFirst
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/qaleDyMFoam2D'
Cleaning ./constant/polyMesh
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/qaleDyMFoam2D/qaleLinearWave
Running setQaleWave on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/qaleDyMFoam2D/qaleLinearWave
Running qaleDyMFoam2D on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/qaleDyMFoam2D/qaleLinearWave
Running reconstructPar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
WARNING: Time t=0.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00367188
WARNING: Time t=0.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00111111
WARNING: Time t=0.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=0.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0025
WARNING: Time t=0.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00275
WARNING: Time t=0.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00376674
WARNING: Time t=0.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0045
WARNING: Time t=1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00365079
WARNING: Time t=1.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00142857
WARNING: Time t=1.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0025
WARNING: Time t=1.4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.000625
WARNING: Time t=1.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=1.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00333333
WARNING: Time t=1.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00294118
WARNING: Time t=1.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00294118
WARNING: Time t=1.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00451389
WARNING: Time t=2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00488636
WARNING: Time t=2.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00238095
WARNING: Time t=2.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=2.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.005
WARNING: Time t=3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00444444
WARNING: Time t=3.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00375
WARNING: Time t=3.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=3.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=3.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00333333
WARNING: Time t=3.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=3.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=3.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.004375
WARNING: Time t=4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00375
WARNING: Time t=4.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00375
WARNING: Time t=4.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00444444
WARNING: Time t=5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00625
Printed 51 VTK files of all cables in folder mooring/results//VTK
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectRigidBody
Cleaning case /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Running topoSet on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Running subsetMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Restore 0/ from 0.orig/
Running setFields on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Running decomposePar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
Running interFoam (4 processes) on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/qaleDyMFoam2D'
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Running setFields on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Running topoSet on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Running splitMeshRegions on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Running decomposePar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Running ccpWsiFoam in parallel on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak using 4 processes
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveDyMFoam'
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running waveGaugesNProbes on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running setWaveParameters on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running waveFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
Running reconstructPar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
WARNING: Time t=0.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00367188
WARNING: Time t=0.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00111111
WARNING: Time t=0.4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0025
WARNING: Time t=0.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.000416667
WARNING: Time t=0.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0025
WARNING: Time t=0.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00270833
WARNING: Time t=0.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00362723
WARNING: Time t=0.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00465278
WARNING: Time t=1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00365079
WARNING: Time t=1.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=1.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.000416667
WARNING: Time t=1.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0025
WARNING: Time t=1.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=1.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00333333
WARNING: Time t=1.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00294118
WARNING: Time t=1.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00294118
WARNING: Time t=1.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00363636
WARNING: Time t=2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.0047619
WARNING: Time t=2.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00270833
WARNING: Time t=2.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=2.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=2.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.005
WARNING: Time t=3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00444444
WARNING: Time t=3.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00375
WARNING: Time t=3.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=3.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=3.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=3.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00333333
WARNING: Time t=3.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=3.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00454545
WARNING: Time t=3.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.005
WARNING: Time t=4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00365079
WARNING: Time t=4.1 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.2 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.3 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.4 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.6 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00166667
WARNING: Time t=4.7 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00285714
WARNING: Time t=4.8 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00375
WARNING: Time t=4.9 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00444444
WARNING: Time t=5 was not found in file during extractValues. Values were extracted from best matching time with error: 0.00625
Printed 51 VTK files of all cables in folder mooring/results//VTK
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody/mooring/results/VTK ~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
~/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/mooredFloatingObjectSixDoFRigidBody
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running surfaceFeatureExtract on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running snappyHexMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running waveFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running reconstructPar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam/icoCoCoupledDamBreak
Created 'icoCoCoupledDamBreak.blockMesh'
Created 'icoCoCoupledDamBreak.OpenFOAM'
Created 'icoCoCoupledDamBreak{coFluidRight}.OpenFOAM'
Created 'icoCoCoupledDamBreak{icoFluidLeft}.OpenFOAM'
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF50/tutorials/wsiFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
Running postProcessWaves2Foam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam/waveFlume
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1812/tutorials/waveFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
Running paraFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/floatingBuoyWithTurbine
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
Running waveGaugesNProbes on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
Running setWaveParameters on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
Running waveFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
Running postProcessWaves2Foam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam/waveFlume
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF301/tutorials/waveFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
Running postProcessWaves2Foam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam/waveFlume
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OFv1906/tutorials/waveFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/qaleDyMFoam2D'
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/couplingDamBreak
Running setFields on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/couplingDamBreak
Running topoSet on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/couplingDamBreak
Running splitMeshRegions on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/couplingDamBreak
Running ccpWsiFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/couplingDamBreak
/opt/software/gcc-system/openmpi-1.10.0/openfoam/2.3.0/OpenFOAM-2.3.0/bin/tools/RunFunctions: line 42: 15254 Aborted $APP_RUN "$@" > log.$APP_NAME 2>&1
created 'couplingDamBreak.blockMesh'
created 'couplingDamBreak.OpenFOAM'
created 'couplingDamBreak{coFluidRight}.OpenFOAM'
created 'couplingDamBreak{icoFluidLeft}.OpenFOAM'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/damBreak
Running setFields on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/damBreak
Running topoSet on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/damBreak
Running splitMeshRegions on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/damBreak
cp: omitting directory ‘0/icoFluid’
Running wsiFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam/damBreak
created 'damBreak.blockMesh'
created 'damBreak.OpenFOAM'
created 'damBreak{icoFluid}.OpenFOAM'
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF230/tutorials/wsiFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running surfaceFeatureExtract on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running snappyHexMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running waveDyMFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoy
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running surfaceFeatureExtract on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running snappyHexMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running decomposePar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running waveDyMFoam in parallel on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar using 4 processes
Running reconstructPar on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyPar
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running surfaceFeatureExtract on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running snappyHexMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running waveDyMFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoySymmetry
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running surfaceFeatureExtract on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running snappyHexMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running waveDyMFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running writeLinearMoorings on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
Running paraFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam/floatingBuoyWithTurbine
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveDyMFoam'
make[1]: Entering directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam'
Running blockMesh on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
Running waveGaugesNProbes on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
Running setWaveParameters on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
Running relaxationZoneLayout on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
Running setWaveField on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
Running waveFoam on /home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam/waveFlume
make[1]: Leaving directory `/home/jenkins/workspace/CCP-WSI/pipeline_dev/OF41/tutorials/waveFoam'
[Pipeline] }
[Pipeline] // dir
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // parallel
[Pipeline] }
[Pipeline] // stage
[Pipeline] End of Pipeline
Finished: SUCCESS
![[Jenkins]](/jenkins/static/44de6af3/images/svgs/logo.svg){kind=logo}
